Optically isolated AC line voltage monitor circuit board to TTL logic output. This board is used to detect when the line voltage is active or failed, also may be used for ON/OFF sensing applications as a closed loop monitor for relay contacts, motors, or as a fuse monitor. Output is 5VDC TTL logic.
Standalone operation, logic output of 5VDC will work with most boards with an input port or microprocessor with 5V tolerant inputs. Requires a regulated 5VDC power source to power the circuits on the board.
Note: 2 of these units may be operated from our relay boards or any of our boards with the 8 channel I/O port option. The boards can be powered by the VCC (+5VDC) and ground connections on these ports, no external power supply required when connected to our units.
Nominal voltage is 600VAC 50/60/400Hz, Voltage tolerance: minimum 540VAC to maximum 660VAC. Will also detect DC voltages within this range.
1 - Detect AC line failure 50/60/400Hz (can also detect lower frequencies and high voltage DC in ON/OFF sensing applications)
2 - Closed loop detector to monitor relay contacts, solenoids, motors, etc.
3 - Fuse or circuit breaker monitor
4 - Monitor ON/OFF AC operation in remote locations, detect when a device is activated or deactivated locally